Control Room Operator

CCR Operator

Location:

KSA, Al Qasim, Qudra.

Department

Operations

Reporting To

Shift Supervisor / Shift Charge Engineer

Job Summary

Monitor and control unit/plant operating parameters and coordinate with other operators regarding all related activities that affect plant operations.

Roles & Responsibilities

• Comply with safety rules and regulations and be familiar with firefighting equipment in the assigned area.
• Be familiar with plant P&IDs, SOPs, work instructions, operation and control logic, emergency operating procedures, and other related documents.
• Monitor all unit parameters and record periodic readings on log sheets. Summarize all activities and events that occur during the shift in the logbook.
• Follow the instructions of the Shift Charge Engineer and Shift Supervisor and coordinate with other operators regarding all operational activities.
• Remain alert and take prompt action during abnormal operating conditions.
• Coordinate and ensure Lock Out & Tag Out (LOTO) during equipment isolation for maintenance in accordance with the approved Permit to Work (PTW) procedure. Normalize equipment after cancellation when instructed.
• Inspect the unit and auxiliaries during the shift to ensure all equipment parameters remain within acceptable limits. Report any abnormalities to the Shift Supervisor / Shift Charge Engineer.
• Perform periodic protection tests under the supervision of the Shift Charge Engineer / Supervisor and maintain the required records. Perform equipment changeovers according to established schedules.
• Raise work requests or defect notifications for faulty equipment and follow up on defect rectification.
• Assist in the training and familiarization of new operators.
• Report near misses and implement prescribed risk controls.
• Report deviations related to the Quality, Health, Safety and Environmental Management System.
• Ensure proper waste disposal measures are followed.
• Perform other duties as assigned.
  
  

Job Specifications

Educational

Desired

• Diploma in Engineering is a must.
  
  

Preferred

• Bachelor’s Degree in Engineering.
  
  

Minimum Experience

Minimum

• 5 years of experience in the same position.
  
  

Required Skills

• General awareness of Quality, Occupational Health & Safety, and Environmental Management System principles.
• Knowledge of waste identification, classification, and disposal.
• Knowledge of emission monitoring.
• Knowledge of the environmental and health impacts of chemicals used in the plant.
• Knowledge of firefighting equipment.
• Knowledge of PPE and safety equipment.
• Knowledge of first-aid measures.
• Good knowledge of Power/Water Plant operational activities.
• Good interpersonal and communication skills.
• Analytical skills.
• Hazard Risk Assessment capability.
• Knowledge of Aspect Impact Assessment.
• Basic computer skills.
  
  

Desired Certification / Job Specific Skill / Training

• ISO 9001, ISO 14001, and OHSAS 18001 awareness/working knowledge is preferred.
  
  

Work Condition

• Ready to work in a remote location.